Mobile Glass loading and unloading machine

-4 wheel base

-Battery powered suction system

-Raises and lowers about 7 feet

-4  cup system

 

Only $9,750.00 or lease for $236. PM oac

 

 

Loading and unloading Machine

Cantilevered glass handling robot units

-Can turn left to right and also vertical to Horizontal

-Can lift up to 1100 LBS

-Also available with electric pump 

 

air-type-vuceem-suckers

 

Pole type system using shop air 

Only $ $12.900  or lease for $ 299. PM oac

Forklift Model glass handling system

-Comes with 6 cups that are adjustable

-Will tilt and turn up and down

 

 Only $19,950.00 or lease for $450. pm oac

 

Material Handling Mobile Equipment

 

-Maximum load: 880 LBS. while second ram is back to end, 550 LBS wile second ram is fully extended

-Maximum lifting height is 138″ from ground to center of suction frame

-Automatically moving speed controlled

-Lifting speed by manual valve assembly

Call for more information.

Priced at only $39,100.00 Leasing available

Limited time Special Only $34,950.00

 

 Pneumatic Bicomponent Two Part Silicone Spreading Machine

  • Model GT02

  • Consists of air motor, pressure plate, feeding pumps, glue gun, blender, proportional composition of inspection stations, and other devices.

  • The two parts consist of base material supply system and curing agent supply system.

  • Has adoption of synchronous linkage with adjustable booster system.

  • Adoption of static reciprocating tube mixer.

  • Simple operation

  • Parts that contact the fluid is made of high quality stainless steel.

  • Runs off compressed air.

  • Dimensions are 43 by 37 by 71 inches

Priced at only $23,680. or lease for $520. PM oac

55 Gallon Hot Melt Pumps ( New)

-55 gallon hot melt pump is widely used for PUR, EVA, PIB hot melt sealant application

-Has the face to face interface, intelligent operating system

-Glue capacity adopts 3 lights to indicate capacity available with an electronic alarm to warn of low capacity

-More specifications available on request

 

 

Available in 2 sizes – 3.5 lbs per minute  $ 39,975.00 or lease for $870. pm oac

                                       -6.6 lbs per minute   $ 48,500.00 or lease for $1,056. pm oac

 

  Hot Melt  Speed Gunning System

-System includes hot melt gunning pump, Heated Hose C/W gun and speed table

-Power supply is 220V  60Hz, 3 Phase

-Hot melt capacity 123 Pounds

-Aerodynamic pressure of rack is 2-4 mpa

-Video available  

-Adjustable sealant pumping speed

-Preheat time is 30 to 60 min.

-Has adjustable temperature control for all for heat areas

hotmeltthe working rack of hot melt machine

 To see video of system in operation click on arrow in middle of above picture

Priced at only $9,995.00  or lease for Only $242. PM oac.

 

 


 

Rotating table for sealing I.G. Units

 

 

Rotating table for sealing I.G. Units

  • – supporting arms can be adjusted to glass size = large vacuum cup to hold glass while sealing
  • – foot switch controls the lifting of glass
  • – foot switch to control 0-90 degree rotating of glass
  • – ease of operation and very efficient to use

New Machine!

 Price Only $4,950.00  

Robotic CNC Automatic Glass Sealing System

-Reduces production labor

-Improves Production efficiency

-Uses 2 part sealant usually silicone

-Intelligent touch human-machine interface for simple operation and convenience

-Available in 2 sizes

-Maximum glass size 98″ X 118″ or 79″ X 98″ on smaller unit

-Glass thickness 3 mm to 12 mm

-Unit thickness 2″ or less

-Working speed 16′-140′ per min.

Priced at only $89,700.  or lease for $1,885. PM oac

Cold Press

 

Cold Press

  • – 3 phase power, 220V, 60 cycles
  • – process width up to 60″
  • – available in 72″ and 84″ at additional cost
  • – up to 1 9/16″ thickness Glass feed speed 40″-200″ per minute
  • – overall dimensions 79″ X 79″ X 47″
  • 3 pair of solid rollers

 Special Price $12,400.00

Lease @ $ 280. PM oac

 

Heated Roller Press 

72″ press  ( other sizes available)

5 Roll heated press

Will do up to 72 X  120 inch units

Variety of air spaces with one simple adjustment

Very clean and easy to operate

adjustable temperature control

Adjustable through put speed

Pass through system

Very low start up costs

Made for Ameracan Equipment

 

heatedpress1heatedpress2

New Machine cost is only

$15,950.                                                                                                                                                                                                    

Or lease for only  $ 338. PM oac

New Air Float and Vacuum Application Table

-Excellent for applying tape type spacers as well as metal spacers with PIB installed

-The vacuum holds the glass firmly in place while the spacer is applied

-The air float allows the glass to freely move about without scratching the glass

-Table has 7 built in squaring rams

-The frame is made of 2″ square steel tubing and has a PVC plate

-Available in 2 sizes  and each unit includes 1 dispencer stand

 

 

 Priced at only $9,950. for the 51″ X 78″  and $11,260.

For the 63″ X 78″

Please call 855-669-9108 for leasing costs

Air Float/Vacuum table with tilt and turning function 

 -Has built in squaring rams  5 on the bottom and 2 on the side

-Come with a spacer application stand

-Excellent for applying tape type spacers as well as metal spacers with PIB installed

-The vacuum holds the glass firmly in place while the spacer is applied

-The air float allows the glass to freely move about without scratching the glass

-The frame is made of 2″ square steel tubing and has a PVC plate

-Available in 2 sizes  and each unit includes 1 dispenser stand

 New tilt applicationtableNew application table type 1-2-1new application table std.

 

Priced at only:

51″ X 78″   $ 13,570.  

63″ X 78″   $ 14,740.  

 Call 855-669-9108 for leasing prices

Semi-Automatic Spacer Bending Machine

-Model ZW-ll

-Control system manufactured by Siemens

-Sensor on the ruler automatically starts drive motor

-Has manual and automatic system

-Memory holds 2 job patterns

-Easy to operate

-Power 220v 60HZ

-Dimensions  150″ X 47″ X 75″

Price at only $17,920.00

 

 

 

Automatic Spacer Bar System

-PLC automatic control, feeding Positioning, Bending and cutting are all completed at one time

-Auto feeding system

-Auto cutting system

-Automatic aluminum spacer bar corner

-Able to make shapes like square, rectangle, circle, trapezoidal, arch, polygonal, etc.

-Everything is done on touch screen except start and stop

-Processing speed adjusts automatically based on the size

-Easy to operate and program

-Power 220 volt 3 phase

-Min size is 11″ X  11″

Max size is 80″ X 80″

-Spacer bar size is 1/4 to 1″

cnc-aluminum-spacer-bar-bending-machine

Price at only $44,800.00

 

 

 Desiccant Filling Machine Automatic

-PLC Control system

-Time setting

-Automatic hole drilling

-Quick and easy to use

-Maximum size is 79″ X 79″

dessicant-filler-with-silicon-cover-function

Price at only $23,360.00

Basic Desiccant filler

-Will fill many aluminum spacer bars at same time

-Price right for a small  to medium operation

manual-dessicant-filler

$4160.00

 Lincoln LM 3000 Hot Melt Pump

New Lincoln LM 3000 Hot Melt Insulated Glass sealing machine

 Insulated Glass sealing machine

  • 4 temperature control zones

  • Excellent heating system

  • Complete with hose and gun

  • Variable frequency drive

  • Brand new Lincoln LM 3000 Hot Melt Pump

hotmelt1

Priced at only $8950.00

Lease @ $205 pm  oac